View All Posts
find registered owner of vehicle by VIN free

How do you clean foggy headlights?


If you want then you can always find registered owner of vehicle by VIN free before purchasing a used vehicle. But not all things are about purchasing and selling anymore. Some things are related to the car when you have it, as well.

If your headlights appear to be foggy and cloudy, it’s because of an upper layer on the lenses that’s been degraded. What you’ll have to do to get rid of those headlights that are cloudy is to remove gently the layer of plastic on the surface. Then you’ll be able to see the more clear intact plastic below.

You’ll require a light Abrasive as well as some elbow grease to eliminate the cloudiness. The type of solution and the amount of effort you’ll have to do will depend on the severity of the cloudiness. Before you begin using any of these techniques, you’ll need to clean the lenses of your headlights thoroughly and clean any road grit or dust.


Toothpaste is an abrasive that is mild in order to cleanse your teeth. Actually, the first toothpaste had crushed eggshells in order to give the grit. If your headlights aren’t completely gone You can apply toothpaste on a towel to eliminate the cloudiness by applying an upward motion, similar to how you would while polishing with the help of wax. Now you can
check car VIN number gratis at without any worries. It will help you to buy a car which you will not have to clean!

Bug spray

Instead of being abrasive physical Some of the chemicals used in insect repellents reduce the quality of plastics. To restore your headlights apply a generous amount of bug repellent onto a rag. Then rub and buff it in a circular manner. After you’re satisfied, wash off any residue left behind so that it doesn’t reduce the quality of the plastic.

Be sure to avoid letting the spray get on other painted or plastic surfaces. It is an excellent idea to use masking tape and newspaper to shield the other surfaces, and reduce the risk of any harm.

Baking soda as well as vinegar

The majority of us are familiar with the grade school science of mixing vinegar and baking soda to create a bubble-like “volcano.” You can use them to make headlights also. Mix 2 or 3 teaspoons baking soda and enough vinegar to make a thick paste. Apply the paste using an absorbent towel and clean it with the help of a water spray bottle. It may take several applications before you notice outcomes, but it can be a great solution to clean out your headlights that are cloudy.

Car Polish

Car polish is an abrasive with a slight abrasive. It removes the oxidized paint when you polish and polishes your car. In certain instances, it can be enough to bring back headlights. In extreme situations, it is possible to apply a rubbing compound also, which can be utilized to eliminate small scratches and imperfections on the finish of a car.

Headlight Rrestorer

The kits for restoring the headlights may contain substances that require to be mixed (there are a variety of products that are available for this method). Make sure you follow all directions exactly and don’t make any alterations. The majority of headlight restoration kits require microfiber cloth. Certain kits permit an easy buffing wheel for drills.


As you could imagine, you’ll need to be cautious when using this technique. Be aware that you’re trying to get rid of the damaged layer, not to penetrate further within the polymer.

You’ll require a spray bottle with soapy water, a clean, low-lint towel as well as sheets of 400-, 1000– and 3,000-grit Sandpaper. Spray the surface with the soapy water, then wipe to get rid of bugs or dirt, and then apply a thin layer of soapy water as you work with the sandpaper that is 400-grit in order to take off the bulk of the old material that has been oxidized.

Then, you can move to the 1,000-grit, then the 3,000-grit and continue to wash it with soapy water. After you’ve finished the lenses are likely to appear scratched, rough, and may even be a bit hazier. This is a normal part of the process, and totally normal.

The next step is applying polish to your car to restore sparkle and clarity to the surface. After that, apply a layer of clear or wax to protect and seal the surface. It is important to do a vehicle background check in order to buy the perfect vehicle. When you have the right vehicle, you do not have to do extra hard work.